From 4b376dc36959f80e92513920d8c2959d59621d90 Mon Sep 17 00:00:00 2001 From: tmeissner Date: Sun, 12 Jan 2014 11:17:10 +0100 Subject: [PATCH] not needed, we only need the object-file which is located under /usr/local/lib/bcm2835.a --- st7565-lcd/ada/bcm2835.c | 1199 -------------------------------------- 1 file changed, 1199 deletions(-) delete mode 100644 st7565-lcd/ada/bcm2835.c diff --git a/st7565-lcd/ada/bcm2835.c b/st7565-lcd/ada/bcm2835.c deleted file mode 100644 index 4db1a34..0000000 --- a/st7565-lcd/ada/bcm2835.c +++ /dev/null @@ -1,1199 +0,0 @@ -// bcm2835.c -// C and C++ support for Broadcom BCM 2835 as used in Raspberry Pi -// http://elinux.org/RPi_Low-level_peripherals -// http://www.raspberrypi.org/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf -// -// Author: Mike McCauley -// Copyright (C) 2011-2013 Mike McCauley -// $Id: bcm2835.c,v 1.12 2013/09/01 00:56:56 mikem Exp mikem $ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "bcm2835.h" - -// This define enables a little test program (by default a blinking output on pin RPI_GPIO_PIN_11) -// You can do some safe, non-destructive testing on any platform with: -// gcc bcm2835.c -D BCM2835_TEST -// ./a.out -//#define BCM2835_TEST - -// Uncommenting this define compiles alternative I2C code for the version 1 RPi -// The P1 header I2C pins are connected to SDA0 and SCL0 on V1. -// By default I2C code is generated for the V2 RPi which has SDA1 and SCL1 connected. -// #define I2C_V1 - -// Pointers to the hardware register bases -volatile uint32_t *bcm2835_gpio = MAP_FAILED; -volatile uint32_t *bcm2835_pwm = MAP_FAILED; -volatile uint32_t *bcm2835_clk = MAP_FAILED; -volatile uint32_t *bcm2835_pads = MAP_FAILED; -volatile uint32_t *bcm2835_spi0 = MAP_FAILED; -volatile uint32_t *bcm2835_bsc0 = MAP_FAILED; -volatile uint32_t *bcm2835_bsc1 = MAP_FAILED; -volatile uint32_t *bcm2835_st = MAP_FAILED; - - -// This variable allows us to test on hardware other than RPi. -// It prevents access to the kernel memory, and does not do any peripheral access -// Instead it prints out what it _would_ do if debug were 0 -static uint8_t debug = 0; - -// I2C The time needed to transmit one byte. In microseconds. -static int i2c_byte_wait_us = 0; - -// -// Low level register access functions -// - -void bcm2835_set_debug(uint8_t d) -{ - debug = d; -} - -// safe read from peripheral -uint32_t bcm2835_peri_read(volatile uint32_t* paddr) -{ - if (debug) - { - printf("bcm2835_peri_read paddr %08X\n", (unsigned) paddr); - return 0; - } - else - { - // Make sure we dont return the _last_ read which might get lost - // if subsequent code changes to a different peripheral - uint32_t ret = *paddr; - *paddr; // Read without assigneing to an unused variable - return ret; - } -} - -// read from peripheral without the read barrier -uint32_t bcm2835_peri_read_nb(volatile uint32_t* paddr) -{ - if (debug) - { - printf("bcm2835_peri_read_nb paddr %08X\n", (unsigned) paddr); - return 0; - } - else - { - return *paddr; - } -} - -// safe write to peripheral -void bcm2835_peri_write(volatile uint32_t* paddr, uint32_t value) -{ - if (debug) - { - printf("bcm2835_peri_write paddr %08X, value %08X\n", (unsigned) paddr, value); - } - else - { - // Make sure we don't rely on the first write, which may get - // lost if the previous access was to a different peripheral. - *paddr = value; - *paddr = value; - } -} - -// write to peripheral without the write barrier -void bcm2835_peri_write_nb(volatile uint32_t* paddr, uint32_t value) -{ - if (debug) - { - printf("bcm2835_peri_write_nb paddr %08X, value %08X\n", - (unsigned) paddr, value); - } - else - { - *paddr = value; - } -} - -// Set/clear only the bits in value covered by the mask -void bcm2835_peri_set_bits(volatile uint32_t* paddr, uint32_t value, uint32_t mask) -{ - uint32_t v = bcm2835_peri_read(paddr); - v = (v & ~mask) | (value & mask); - bcm2835_peri_write(paddr, v); -} - -// -// Low level convenience functions -// - -// Function select -// pin is a BCM2835 GPIO pin number NOT RPi pin number -// There are 6 control registers, each control the functions of a block -// of 10 pins. -// Each control register has 10 sets of 3 bits per GPIO pin: -// -// 000 = GPIO Pin X is an input -// 001 = GPIO Pin X is an output -// 100 = GPIO Pin X takes alternate function 0 -// 101 = GPIO Pin X takes alternate function 1 -// 110 = GPIO Pin X takes alternate function 2 -// 111 = GPIO Pin X takes alternate function 3 -// 011 = GPIO Pin X takes alternate function 4 -// 010 = GPIO Pin X takes alternate function 5 -// -// So the 3 bits for port X are: -// X / 10 + ((X % 10) * 3) -void bcm2835_gpio_fsel(uint8_t pin, uint8_t mode) -{ - // Function selects are 10 pins per 32 bit word, 3 bits per pin - volatile uint32_t* paddr = bcm2835_gpio + BCM2835_GPFSEL0/4 + (pin/10); - uint8_t shift = (pin % 10) * 3; - uint32_t mask = BCM2835_GPIO_FSEL_MASK << shift; - uint32_t value = mode << shift; - bcm2835_peri_set_bits(paddr, value, mask); -} - -// Set output pin -void bcm2835_gpio_set(uint8_t pin) -{ - volatile uint32_t* paddr = bcm2835_gpio + BCM2835_GPSET0/4 + pin/32; - uint8_t shift = pin % 32; - bcm2835_peri_write(paddr, 1 << shift); -} - -// Clear output pin -void bcm2835_gpio_clr(uint8_t pin) -{ - volatile uint32_t* paddr = bcm2835_gpio + BCM2835_GPCLR0/4 + pin/32; - uint8_t shift = pin % 32; - bcm2835_peri_write(paddr, 1 << shift); -} - -// Set all output pins in the mask -void bcm2835_gpio_set_multi(uint32_t mask) -{ - volatile uint32_t* paddr = bcm2835_gpio + BCM2835_GPSET0/4; - bcm2835_peri_write(paddr, mask); -} - -// Clear all output pins in the mask -void bcm2835_gpio_clr_multi(uint32_t mask) -{ - volatile uint32_t* paddr = bcm2835_gpio + BCM2835_GPCLR0/4; - bcm2835_peri_write(paddr, mask); -} - -// Read input pin -uint8_t bcm2835_gpio_lev(uint8_t pin) -{ - volatile uint32_t* paddr = bcm2835_gpio + BCM2835_GPLEV0/4 + pin/32; - uint8_t shift = pin % 32; - uint32_t value = bcm2835_peri_read(paddr); - return (value & (1 << shift)) ? HIGH : LOW; -} - -// See if an event detection bit is set -// Sigh cant support interrupts yet -uint8_t bcm2835_gpio_eds(uint8_t pin) -{ - volatile uint32_t* paddr = bcm2835_gpio + BCM2835_GPEDS0/4 + pin/32; - uint8_t shift = pin % 32; - uint32_t value = bcm2835_peri_read(paddr); - return (value & (1 << shift)) ? HIGH : LOW; -} - -// Write a 1 to clear the bit in EDS -void bcm2835_gpio_set_eds(uint8_t pin) -{ - volatile uint32_t* paddr = bcm2835_gpio + BCM2835_GPEDS0/4 + pin/32; - uint8_t shift = pin % 32; - uint32_t value = 1 << shift; - bcm2835_peri_write(paddr, value); -} - -// Rising edge detect enable -void bcm2835_gpio_ren(uint8_t pin) -{ - volatile uint32_t* paddr = bcm2835_gpio + BCM2835_GPREN0/4 + pin/32; - uint8_t shift = pin % 32; - uint32_t value = 1 << shift; - bcm2835_peri_set_bits(paddr, value, value); -} -void bcm2835_gpio_clr_ren(uint8_t pin) -{ - volatile uint32_t* paddr = bcm2835_gpio + BCM2835_GPREN0/4 + pin/32; - uint8_t shift = pin % 32; - uint32_t value = 1 << shift; - bcm2835_peri_set_bits(paddr, 0, value); -} - -// Falling edge detect enable -void bcm2835_gpio_fen(uint8_t pin) -{ - volatile uint32_t* paddr = bcm2835_gpio + BCM2835_GPFEN0/4 + pin/32; - uint8_t shift = pin % 32; - uint32_t value = 1 << shift; - bcm2835_peri_set_bits(paddr, value, value); -} -void bcm2835_gpio_clr_fen(uint8_t pin) -{ - volatile uint32_t* paddr = bcm2835_gpio + BCM2835_GPFEN0/4 + pin/32; - uint8_t shift = pin % 32; - uint32_t value = 1 << shift; - bcm2835_peri_set_bits(paddr, 0, value); -} - -// High detect enable -void bcm2835_gpio_hen(uint8_t pin) -{ - volatile uint32_t* paddr = bcm2835_gpio + BCM2835_GPHEN0/4 + pin/32; - uint8_t shift = pin % 32; - uint32_t value = 1 << shift; - bcm2835_peri_set_bits(paddr, value, value); -} -void bcm2835_gpio_clr_hen(uint8_t pin) -{ - volatile uint32_t* paddr = bcm2835_gpio + BCM2835_GPHEN0/4 + pin/32; - uint8_t shift = pin % 32; - uint32_t value = 1 << shift; - bcm2835_peri_set_bits(paddr, 0, value); -} - -// Low detect enable -void bcm2835_gpio_len(uint8_t pin) -{ - volatile uint32_t* paddr = bcm2835_gpio + BCM2835_GPLEN0/4 + pin/32; - uint8_t shift = pin % 32; - uint32_t value = 1 << shift; - bcm2835_peri_set_bits(paddr, value, value); -} -void bcm2835_gpio_clr_len(uint8_t pin) -{ - volatile uint32_t* paddr = bcm2835_gpio + BCM2835_GPLEN0/4 + pin/32; - uint8_t shift = pin % 32; - uint32_t value = 1 << shift; - bcm2835_peri_set_bits(paddr, 0, value); -} - -// Async rising edge detect enable -void bcm2835_gpio_aren(uint8_t pin) -{ - volatile uint32_t* paddr = bcm2835_gpio + BCM2835_GPAREN0/4 + pin/32; - uint8_t shift = pin % 32; - uint32_t value = 1 << shift; - bcm2835_peri_set_bits(paddr, value, value); -} -void bcm2835_gpio_clr_aren(uint8_t pin) -{ - volatile uint32_t* paddr = bcm2835_gpio + BCM2835_GPAREN0/4 + pin/32; - uint8_t shift = pin % 32; - uint32_t value = 1 << shift; - bcm2835_peri_set_bits(paddr, 0, value); -} - -// Async falling edge detect enable -void bcm2835_gpio_afen(uint8_t pin) -{ - volatile uint32_t* paddr = bcm2835_gpio + BCM2835_GPAFEN0/4 + pin/32; - uint8_t shift = pin % 32; - uint32_t value = 1 << shift; - bcm2835_peri_set_bits(paddr, value, value); -} -void bcm2835_gpio_clr_afen(uint8_t pin) -{ - volatile uint32_t* paddr = bcm2835_gpio + BCM2835_GPAFEN0/4 + pin/32; - uint8_t shift = pin % 32; - uint32_t value = 1 << shift; - bcm2835_peri_set_bits(paddr, 0, value); -} - -// Set pullup/down -void bcm2835_gpio_pud(uint8_t pud) -{ - volatile uint32_t* paddr = bcm2835_gpio + BCM2835_GPPUD/4; - bcm2835_peri_write(paddr, pud); -} - -// Pullup/down clock -// Clocks the value of pud into the GPIO pin -void bcm2835_gpio_pudclk(uint8_t pin, uint8_t on) -{ - volatile uint32_t* paddr = bcm2835_gpio + BCM2835_GPPUDCLK0/4 + pin/32; - uint8_t shift = pin % 32; - bcm2835_peri_write(paddr, (on ? 1 : 0) << shift); -} - -// Read GPIO pad behaviour for groups of GPIOs -uint32_t bcm2835_gpio_pad(uint8_t group) -{ - volatile uint32_t* paddr = bcm2835_pads + BCM2835_PADS_GPIO_0_27/4 + group*2; - return bcm2835_peri_read(paddr); -} - -// Set GPIO pad behaviour for groups of GPIOs -// powerup value for al pads is -// BCM2835_PAD_SLEW_RATE_UNLIMITED | BCM2835_PAD_HYSTERESIS_ENABLED | BCM2835_PAD_DRIVE_8mA -void bcm2835_gpio_set_pad(uint8_t group, uint32_t control) -{ - volatile uint32_t* paddr = bcm2835_pads + BCM2835_PADS_GPIO_0_27/4 + group*2; - bcm2835_peri_write(paddr, control | BCM2835_PAD_PASSWRD); -} - -// Some convenient arduino-like functions -// milliseconds -void bcm2835_delay(unsigned int millis) -{ - struct timespec sleeper; - - sleeper.tv_sec = (time_t)(millis / 1000); - sleeper.tv_nsec = (long)(millis % 1000) * 1000000; - nanosleep(&sleeper, NULL); -} - -// microseconds -void bcm2835_delayMicroseconds(uint64_t micros) -{ - struct timespec t1; - uint64_t start; - - // Calling nanosleep() takes at least 100-200 us, so use it for - // long waits and use a busy wait on the System Timer for the rest. - start = bcm2835_st_read(); - - if (micros > 450) - { - t1.tv_sec = 0; - t1.tv_nsec = 1000 * (long)(micros - 200); - nanosleep(&t1, NULL); - } - - bcm2835_st_delay(start, micros); -} - -// -// Higher level convenience functions -// - -// Set the state of an output -void bcm2835_gpio_write(uint8_t pin, uint8_t on) -{ - if (on) - bcm2835_gpio_set(pin); - else - bcm2835_gpio_clr(pin); -} - -// Set the state of a all 32 outputs in the mask to on or off -void bcm2835_gpio_write_multi(uint32_t mask, uint8_t on) -{ - if (on) - bcm2835_gpio_set_multi(mask); - else - bcm2835_gpio_clr_multi(mask); -} - -// Set the state of a all 32 outputs in the mask to the values in value -void bcm2835_gpio_write_mask(uint32_t value, uint32_t mask) -{ - bcm2835_gpio_set_multi(value & mask); - bcm2835_gpio_clr_multi((~value) & mask); -} - -// Set the pullup/down resistor for a pin -// -// The GPIO Pull-up/down Clock Registers control the actuation of internal pull-downs on -// the respective GPIO pins. These registers must be used in conjunction with the GPPUD -// register to effect GPIO Pull-up/down changes. The following sequence of events is -// required: -// 1. Write to GPPUD to set the required control signal (i.e. Pull-up or Pull-Down or neither -// to remove the current Pull-up/down) -// 2. Wait 150 cycles ? this provides the required set-up time for the control signal -// 3. Write to GPPUDCLK0/1 to clock the control signal into the GPIO pads you wish to -// modify ? NOTE only the pads which receive a clock will be modified, all others will -// retain their previous state. -// 4. Wait 150 cycles ? this provides the required hold time for the control signal -// 5. Write to GPPUD to remove the control signal -// 6. Write to GPPUDCLK0/1 to remove the clock -// -// RPi has P1-03 and P1-05 with 1k8 pullup resistor -void bcm2835_gpio_set_pud(uint8_t pin, uint8_t pud) -{ - bcm2835_gpio_pud(pud); - delayMicroseconds(10); - bcm2835_gpio_pudclk(pin, 1); - delayMicroseconds(10); - bcm2835_gpio_pud(BCM2835_GPIO_PUD_OFF); - bcm2835_gpio_pudclk(pin, 0); -} - -void bcm2835_spi_begin(void) -{ - // Set the SPI0 pins to the Alt 0 function to enable SPI0 access on them - bcm2835_gpio_fsel(RPI_GPIO_P1_26, BCM2835_GPIO_FSEL_ALT0); // CE1 - bcm2835_gpio_fsel(RPI_GPIO_P1_24, BCM2835_GPIO_FSEL_ALT0); // CE0 - bcm2835_gpio_fsel(RPI_GPIO_P1_21, BCM2835_GPIO_FSEL_ALT0); // MISO - bcm2835_gpio_fsel(RPI_GPIO_P1_19, BCM2835_GPIO_FSEL_ALT0); // MOSI - bcm2835_gpio_fsel(RPI_GPIO_P1_23, BCM2835_GPIO_FSEL_ALT0); // CLK - - // Set the SPI CS register to the some sensible defaults - volatile uint32_t* paddr = bcm2835_spi0 + BCM2835_SPI0_CS/4; - bcm2835_peri_write(paddr, 0); // All 0s - - // Clear TX and RX fifos - bcm2835_peri_write_nb(paddr, BCM2835_SPI0_CS_CLEAR); -} - -void bcm2835_spi_end(void) -{ - // Set all the SPI0 pins back to input - bcm2835_gpio_fsel(RPI_GPIO_P1_26, BCM2835_GPIO_FSEL_INPT); // CE1 - bcm2835_gpio_fsel(RPI_GPIO_P1_24, BCM2835_GPIO_FSEL_INPT); // CE0 - bcm2835_gpio_fsel(RPI_GPIO_P1_21, BCM2835_GPIO_FSEL_INPT); // MISO - bcm2835_gpio_fsel(RPI_GPIO_P1_19, BCM2835_GPIO_FSEL_INPT); // MOSI - bcm2835_gpio_fsel(RPI_GPIO_P1_23, BCM2835_GPIO_FSEL_INPT); // CLK -} - -void bcm2835_spi_setBitOrder(uint8_t order) -{ - // BCM2835_SPI_BIT_ORDER_MSBFIRST is the only one suported by SPI0 -} - -// defaults to 0, which means a divider of 65536. -// The divisor must be a power of 2. Odd numbers -// rounded down. The maximum SPI clock rate is -// of the APB clock -void bcm2835_spi_setClockDivider(uint16_t divider) -{ - volatile uint32_t* paddr = bcm2835_spi0 + BCM2835_SPI0_CLK/4; - bcm2835_peri_write(paddr, divider); -} - -void bcm2835_spi_setDataMode(uint8_t mode) -{ - volatile uint32_t* paddr = bcm2835_spi0 + BCM2835_SPI0_CS/4; - // Mask in the CPO and CPHA bits of CS - bcm2835_peri_set_bits(paddr, mode << 2, BCM2835_SPI0_CS_CPOL | BCM2835_SPI0_CS_CPHA); -} - -// Writes (and reads) a single byte to SPI -uint8_t bcm2835_spi_transfer(uint8_t value) -{ - volatile uint32_t* paddr = bcm2835_spi0 + BCM2835_SPI0_CS/4; - volatile uint32_t* fifo = bcm2835_spi0 + BCM2835_SPI0_FIFO/4; - - // This is Polled transfer as per section 10.6.1 - // BUG ALERT: what happens if we get interupted in this section, and someone else - // accesses a different peripheral? - // Clear TX and RX fifos - bcm2835_peri_set_bits(paddr, BCM2835_SPI0_CS_CLEAR, BCM2835_SPI0_CS_CLEAR); - - // Set TA = 1 - bcm2835_peri_set_bits(paddr, BCM2835_SPI0_CS_TA, BCM2835_SPI0_CS_TA); - - // Maybe wait for TXD - while (!(bcm2835_peri_read(paddr) & BCM2835_SPI0_CS_TXD)) - ; - - // Write to FIFO, no barrier - bcm2835_peri_write_nb(fifo, value); - - // Wait for DONE to be set - while (!(bcm2835_peri_read_nb(paddr) & BCM2835_SPI0_CS_DONE)) - ; - - // Read any byte that was sent back by the slave while we sere sending to it - uint32_t ret = bcm2835_peri_read_nb(fifo); - - // Set TA = 0, and also set the barrier - bcm2835_peri_set_bits(paddr, 0, BCM2835_SPI0_CS_TA); - - return ret; -} - -// Writes (and reads) an number of bytes to SPI -void bcm2835_spi_transfernb(char* tbuf, char* rbuf, uint32_t len) -{ - volatile uint32_t* paddr = bcm2835_spi0 + BCM2835_SPI0_CS/4; - volatile uint32_t* fifo = bcm2835_spi0 + BCM2835_SPI0_FIFO/4; - - // This is Polled transfer as per section 10.6.1 - // BUG ALERT: what happens if we get interupted in this section, and someone else - // accesses a different peripheral? - - // Clear TX and RX fifos - bcm2835_peri_set_bits(paddr, BCM2835_SPI0_CS_CLEAR, BCM2835_SPI0_CS_CLEAR); - - // Set TA = 1 - bcm2835_peri_set_bits(paddr, BCM2835_SPI0_CS_TA, BCM2835_SPI0_CS_TA); - - uint32_t i; - for (i = 0; i < len; i++) - { - // Maybe wait for TXD - while (!(bcm2835_peri_read(paddr) & BCM2835_SPI0_CS_TXD)) - ; - - // Write to FIFO, no barrier - bcm2835_peri_write_nb(fifo, tbuf[i]); - - // Wait for RXD - while (!(bcm2835_peri_read(paddr) & BCM2835_SPI0_CS_RXD)) - ; - - // then read the data byte - rbuf[i] = bcm2835_peri_read_nb(fifo); - } - // Wait for DONE to be set - while (!(bcm2835_peri_read_nb(paddr) & BCM2835_SPI0_CS_DONE)) - ; - - // Set TA = 0, and also set the barrier - bcm2835_peri_set_bits(paddr, 0, BCM2835_SPI0_CS_TA); -} - -// Writes an number of bytes to SPI -void bcm2835_spi_writenb(char* tbuf, uint32_t len) -{ - volatile uint32_t* paddr = bcm2835_spi0 + BCM2835_SPI0_CS/4; - volatile uint32_t* fifo = bcm2835_spi0 + BCM2835_SPI0_FIFO/4; - - // This is Polled transfer as per section 10.6.1 - // BUG ALERT: what happens if we get interupted in this section, and someone else - // accesses a different peripheral? - - // Clear TX and RX fifos - bcm2835_peri_set_bits(paddr, BCM2835_SPI0_CS_CLEAR, BCM2835_SPI0_CS_CLEAR); - - // Set TA = 1 - bcm2835_peri_set_bits(paddr, BCM2835_SPI0_CS_TA, BCM2835_SPI0_CS_TA); - - uint32_t i; - for (i = 0; i < len; i++) - { - // Maybe wait for TXD - while (!(bcm2835_peri_read(paddr) & BCM2835_SPI0_CS_TXD)) - ; - - // Write to FIFO, no barrier - bcm2835_peri_write_nb(fifo, tbuf[i]); - - // Read from FIFO to prevent stalling - while (bcm2835_peri_read(paddr) & BCM2835_SPI0_CS_RXD) - (void) bcm2835_peri_read_nb(fifo); - } - - // Wait for DONE to be set - while (!(bcm2835_peri_read_nb(paddr) & BCM2835_SPI0_CS_DONE)) { - while (bcm2835_peri_read(paddr) & BCM2835_SPI0_CS_RXD) - (void) bcm2835_peri_read_nb(fifo); - }; - - // Set TA = 0, and also set the barrier - bcm2835_peri_set_bits(paddr, 0, BCM2835_SPI0_CS_TA); -} - -// Writes (and reads) an number of bytes to SPI -// Read bytes are copied over onto the transmit buffer -void bcm2835_spi_transfern(char* buf, uint32_t len) -{ - bcm2835_spi_transfernb(buf, buf, len); -} - -void bcm2835_spi_chipSelect(uint8_t cs) -{ - volatile uint32_t* paddr = bcm2835_spi0 + BCM2835_SPI0_CS/4; - // Mask in the CS bits of CS - bcm2835_peri_set_bits(paddr, cs, BCM2835_SPI0_CS_CS); -} - -void bcm2835_spi_setChipSelectPolarity(uint8_t cs, uint8_t active) -{ - volatile uint32_t* paddr = bcm2835_spi0 + BCM2835_SPI0_CS/4; - uint8_t shift = 21 + cs; - // Mask in the appropriate CSPOLn bit - bcm2835_peri_set_bits(paddr, active << shift, 1 << shift); -} - -void bcm2835_i2c_begin(void) -{ -#ifdef I2C_V1 - volatile uint32_t* paddr = bcm2835_bsc0 + BCM2835_BSC_DIV/4; - // Set the I2C/BSC0 pins to the Alt 0 function to enable I2C access on them - bcm2835_gpio_fsel(RPI_GPIO_P1_03, BCM2835_GPIO_FSEL_ALT0); // SDA - bcm2835_gpio_fsel(RPI_GPIO_P1_05, BCM2835_GPIO_FSEL_ALT0); // SCL -#else - volatile uint32_t* paddr = bcm2835_bsc1 + BCM2835_BSC_DIV/4; - // Set the I2C/BSC1 pins to the Alt 0 function to enable I2C access on them - bcm2835_gpio_fsel(RPI_V2_GPIO_P1_03, BCM2835_GPIO_FSEL_ALT0); // SDA - bcm2835_gpio_fsel(RPI_V2_GPIO_P1_05, BCM2835_GPIO_FSEL_ALT0); // SCL -#endif - - // Read the clock divider register - uint16_t cdiv = bcm2835_peri_read(paddr); - // Calculate time for transmitting one byte - // 1000000 = micros seconds in a second - // 9 = Clocks per byte : 8 bits + ACK - i2c_byte_wait_us = ((float)cdiv / BCM2835_CORE_CLK_HZ) * 1000000 * 9; -} - -void bcm2835_i2c_end(void) -{ -#ifdef I2C_V1 - // Set all the I2C/BSC0 pins back to input - bcm2835_gpio_fsel(RPI_GPIO_P1_03, BCM2835_GPIO_FSEL_INPT); // SDA - bcm2835_gpio_fsel(RPI_GPIO_P1_05, BCM2835_GPIO_FSEL_INPT); // SCL -#else - // Set all the I2C/BSC1 pins back to input - bcm2835_gpio_fsel(RPI_V2_GPIO_P1_03, BCM2835_GPIO_FSEL_INPT); // SDA - bcm2835_gpio_fsel(RPI_V2_GPIO_P1_05, BCM2835_GPIO_FSEL_INPT); // SCL -#endif -} - -void bcm2835_i2c_setSlaveAddress(uint8_t addr) -{ - // Set I2C Device Address -#ifdef I2C_V1 - volatile uint32_t* paddr = bcm2835_bsc0 + BCM2835_BSC_A/4; -#else - volatile uint32_t* paddr = bcm2835_bsc1 + BCM2835_BSC_A/4; -#endif - bcm2835_peri_write(paddr, addr); -} - -// defaults to 0x5dc, should result in a 166.666 kHz I2C clock frequency. -// The divisor must be a power of 2. Odd numbers -// rounded down. -void bcm2835_i2c_setClockDivider(uint16_t divider) -{ -#ifdef I2C_V1 - volatile uint32_t* paddr = bcm2835_bsc0 + BCM2835_BSC_DIV/4; -#else - volatile uint32_t* paddr = bcm2835_bsc1 + BCM2835_BSC_DIV/4; -#endif - bcm2835_peri_write(paddr, divider); - // Calculate time for transmitting one byte - // 1000000 = micros seconds in a second - // 9 = Clocks per byte : 8 bits + ACK - i2c_byte_wait_us = ((float)divider / BCM2835_CORE_CLK_HZ) * 1000000 * 9; -} - -// set I2C clock divider by means of a baudrate number -void bcm2835_i2c_set_baudrate(uint32_t baudrate) -{ - uint32_t divider; - // use 0xFFFE mask to limit a max value and round down any odd number - divider = (BCM2835_CORE_CLK_HZ / baudrate) & 0xFFFE; - bcm2835_i2c_setClockDivider( (uint16_t)divider ); -} - -// Writes an number of bytes to I2C -uint8_t bcm2835_i2c_write(const char * buf, uint32_t len) -{ -#ifdef I2C_V1 - volatile uint32_t* dlen = bcm2835_bsc0 + BCM2835_BSC_DLEN/4; - volatile uint32_t* fifo = bcm2835_bsc0 + BCM2835_BSC_FIFO/4; - volatile uint32_t* status = bcm2835_bsc0 + BCM2835_BSC_S/4; - volatile uint32_t* control = bcm2835_bsc0 + BCM2835_BSC_C/4; -#else - volatile uint32_t* dlen = bcm2835_bsc1 + BCM2835_BSC_DLEN/4; - volatile uint32_t* fifo = bcm2835_bsc1 + BCM2835_BSC_FIFO/4; - volatile uint32_t* status = bcm2835_bsc1 + BCM2835_BSC_S/4; - volatile uint32_t* control = bcm2835_bsc1 + BCM2835_BSC_C/4; -#endif - - uint32_t remaining = len; - uint32_t i = 0; - uint8_t reason = BCM2835_I2C_REASON_OK; - - // Clear FIFO - bcm2835_peri_set_bits(control, BCM2835_BSC_C_CLEAR_1 , BCM2835_BSC_C_CLEAR_1 ); - // Clear Status - bcm2835_peri_write_nb(status, BCM2835_BSC_S_CLKT | BCM2835_BSC_S_ERR | BCM2835_BSC_S_DONE); - // Set Data Length - bcm2835_peri_write_nb(dlen, len); - // pre populate FIFO with max buffer - while( remaining && ( i < BCM2835_BSC_FIFO_SIZE ) ) - { - bcm2835_peri_write_nb(fifo, buf[i]); - i++; - remaining--; - } - - // Enable device and start transfer - bcm2835_peri_write_nb(control, BCM2835_BSC_C_I2CEN | BCM2835_BSC_C_ST); - - // Transfer is over when BCM2835_BSC_S_DONE - while(!(bcm2835_peri_read_nb(status) & BCM2835_BSC_S_DONE )) - { - while ( remaining && (bcm2835_peri_read_nb(status) & BCM2835_BSC_S_TXD )) - { - // Write to FIFO, no barrier - bcm2835_peri_write_nb(fifo, buf[i]); - i++; - remaining--; - } - } - - // Received a NACK - if (bcm2835_peri_read(status) & BCM2835_BSC_S_ERR) - { - reason = BCM2835_I2C_REASON_ERROR_NACK; - } - - // Received Clock Stretch Timeout - else if (bcm2835_peri_read(status) & BCM2835_BSC_S_CLKT) - { - reason = BCM2835_I2C_REASON_ERROR_CLKT; - } - - // Not all data is sent - else if (remaining) - { - reason = BCM2835_I2C_REASON_ERROR_DATA; - } - - bcm2835_peri_set_bits(control, BCM2835_BSC_S_DONE , BCM2835_BSC_S_DONE); - - return reason; -} - -// Read an number of bytes from I2C -uint8_t bcm2835_i2c_read(char* buf, uint32_t len) -{ -#ifdef I2C_V1 - volatile uint32_t* dlen = bcm2835_bsc0 + BCM2835_BSC_DLEN/4; - volatile uint32_t* fifo = bcm2835_bsc0 + BCM2835_BSC_FIFO/4; - volatile uint32_t* status = bcm2835_bsc0 + BCM2835_BSC_S/4; - volatile uint32_t* control = bcm2835_bsc0 + BCM2835_BSC_C/4; -#else - volatile uint32_t* dlen = bcm2835_bsc1 + BCM2835_BSC_DLEN/4; - volatile uint32_t* fifo = bcm2835_bsc1 + BCM2835_BSC_FIFO/4; - volatile uint32_t* status = bcm2835_bsc1 + BCM2835_BSC_S/4; - volatile uint32_t* control = bcm2835_bsc1 + BCM2835_BSC_C/4; -#endif - - uint32_t remaining = len; - uint32_t i = 0; - uint8_t reason = BCM2835_I2C_REASON_OK; - - // Clear FIFO - bcm2835_peri_set_bits(control, BCM2835_BSC_C_CLEAR_1 , BCM2835_BSC_C_CLEAR_1 ); - // Clear Status - bcm2835_peri_write_nb(status, BCM2835_BSC_S_CLKT | BCM2835_BSC_S_ERR | BCM2835_BSC_S_DONE); - // Set Data Length - bcm2835_peri_write_nb(dlen, len); - // Start read - bcm2835_peri_write_nb(control, BCM2835_BSC_C_I2CEN | BCM2835_BSC_C_ST | BCM2835_BSC_C_READ); - - // wait for transfer to complete - while (!(bcm2835_peri_read_nb(status) & BCM2835_BSC_S_DONE)) - { - // we must empty the FIFO as it is populated and not use any delay - while (bcm2835_peri_read_nb(status) & BCM2835_BSC_S_RXD) - { - // Read from FIFO, no barrier - buf[i] = bcm2835_peri_read_nb(fifo); - i++; - remaining--; - } - } - - // transfer has finished - grab any remaining stuff in FIFO - while (remaining && (bcm2835_peri_read_nb(status) & BCM2835_BSC_S_RXD)) - { - // Read from FIFO, no barrier - buf[i] = bcm2835_peri_read_nb(fifo); - i++; - remaining--; - } - - // Received a NACK - if (bcm2835_peri_read(status) & BCM2835_BSC_S_ERR) - { - reason = BCM2835_I2C_REASON_ERROR_NACK; - } - - // Received Clock Stretch Timeout - else if (bcm2835_peri_read(status) & BCM2835_BSC_S_CLKT) - { - reason = BCM2835_I2C_REASON_ERROR_CLKT; - } - - // Not all data is received - else if (remaining) - { - reason = BCM2835_I2C_REASON_ERROR_DATA; - } - - bcm2835_peri_set_bits(control, BCM2835_BSC_S_DONE , BCM2835_BSC_S_DONE); - - return reason; -} - -// Read an number of bytes from I2C sending a repeated start after writing -// the required register. Only works if your device supports this mode -uint8_t bcm2835_i2c_read_register_rs(char* regaddr, char* buf, uint32_t len) -{ -#ifdef I2C_V1 - volatile uint32_t* dlen = bcm2835_bsc0 + BCM2835_BSC_DLEN/4; - volatile uint32_t* fifo = bcm2835_bsc0 + BCM2835_BSC_FIFO/4; - volatile uint32_t* status = bcm2835_bsc0 + BCM2835_BSC_S/4; - volatile uint32_t* control = bcm2835_bsc0 + BCM2835_BSC_C/4; -#else - volatile uint32_t* dlen = bcm2835_bsc1 + BCM2835_BSC_DLEN/4; - volatile uint32_t* fifo = bcm2835_bsc1 + BCM2835_BSC_FIFO/4; - volatile uint32_t* status = bcm2835_bsc1 + BCM2835_BSC_S/4; - volatile uint32_t* control = bcm2835_bsc1 + BCM2835_BSC_C/4; -#endif - uint32_t remaining = len; - uint32_t i = 0; - uint8_t reason = BCM2835_I2C_REASON_OK; - - // Clear FIFO - bcm2835_peri_set_bits(control, BCM2835_BSC_C_CLEAR_1 , BCM2835_BSC_C_CLEAR_1 ); - // Clear Status - bcm2835_peri_write_nb(status, BCM2835_BSC_S_CLKT | BCM2835_BSC_S_ERR | BCM2835_BSC_S_DONE); - // Set Data Length - bcm2835_peri_write_nb(dlen, 1); - // Enable device and start transfer - bcm2835_peri_write_nb(control, BCM2835_BSC_C_I2CEN); - bcm2835_peri_write_nb(fifo, regaddr[0]); - bcm2835_peri_write_nb(control, BCM2835_BSC_C_I2CEN | BCM2835_BSC_C_ST); - - // poll for transfer has started - while ( !( bcm2835_peri_read_nb(status) & BCM2835_BSC_S_TA ) ) - { - // Linux may cause us to miss entire transfer stage - if(bcm2835_peri_read(status) & BCM2835_BSC_S_DONE) - break; - } - - // Send a repeated start with read bit set in address - bcm2835_peri_write_nb(dlen, len); - bcm2835_peri_write_nb(control, BCM2835_BSC_C_I2CEN | BCM2835_BSC_C_ST | BCM2835_BSC_C_READ ); - - // Wait for write to complete and first byte back. - bcm2835_delayMicroseconds(i2c_byte_wait_us * 3); - - // wait for transfer to complete - while (!(bcm2835_peri_read_nb(status) & BCM2835_BSC_S_DONE)) - { - // we must empty the FIFO as it is populated and not use any delay - while (remaining && bcm2835_peri_read_nb(status) & BCM2835_BSC_S_RXD) - { - // Read from FIFO, no barrier - buf[i] = bcm2835_peri_read_nb(fifo); - i++; - remaining--; - } - } - - // transfer has finished - grab any remaining stuff in FIFO - while (remaining && (bcm2835_peri_read_nb(status) & BCM2835_BSC_S_RXD)) - { - // Read from FIFO, no barrier - buf[i] = bcm2835_peri_read_nb(fifo); - i++; - remaining--; - } - - // Received a NACK - if (bcm2835_peri_read(status) & BCM2835_BSC_S_ERR) - { - reason = BCM2835_I2C_REASON_ERROR_NACK; - } - - // Received Clock Stretch Timeout - else if (bcm2835_peri_read(status) & BCM2835_BSC_S_CLKT) - { - reason = BCM2835_I2C_REASON_ERROR_CLKT; - } - - // Not all data is sent - else if (remaining) - { - reason = BCM2835_I2C_REASON_ERROR_DATA; - } - - bcm2835_peri_set_bits(control, BCM2835_BSC_S_DONE , BCM2835_BSC_S_DONE); - - return reason; -} - -// Read the System Timer Counter (64-bits) -uint64_t bcm2835_st_read(void) -{ - volatile uint32_t* paddr; - uint64_t st; - paddr = bcm2835_st + BCM2835_ST_CHI/4; - st = bcm2835_peri_read(paddr); - st <<= 32; - paddr = bcm2835_st + BCM2835_ST_CLO/4; - st += bcm2835_peri_read(paddr); - return st; -} - -// Delays for the specified number of microseconds with offset -void bcm2835_st_delay(uint64_t offset_micros, uint64_t micros) -{ - uint64_t compare = offset_micros + micros; - - while(bcm2835_st_read() < compare) - ; -} - -// PWM - -void bcm2835_pwm_set_clock(uint32_t divisor) -{ - // From Gerts code - divisor &= 0xfff; - // Stop PWM clock - bcm2835_peri_write(bcm2835_clk + BCM2835_PWMCLK_CNTL, BCM2835_PWM_PASSWRD | 0x01); - bcm2835_delay(110); // Prevents clock going slow - // Wait for the clock to be not busy - while ((bcm2835_peri_read(bcm2835_clk + BCM2835_PWMCLK_CNTL) & 0x80) != 0) - bcm2835_delay(1); - // set the clock divider and enable PWM clock - bcm2835_peri_write(bcm2835_clk + BCM2835_PWMCLK_DIV, BCM2835_PWM_PASSWRD | (divisor << 12)); - bcm2835_peri_write(bcm2835_clk + BCM2835_PWMCLK_CNTL, BCM2835_PWM_PASSWRD | 0x11); // Source=osc and enable -} - -void bcm2835_pwm_set_mode(uint8_t channel, uint8_t markspace, uint8_t enabled) -{ - uint32_t control = bcm2835_peri_read(bcm2835_pwm + BCM2835_PWM_CONTROL); - - if (channel == 0) - { - if (markspace) - control |= BCM2835_PWM0_MS_MODE; - else - control &= ~BCM2835_PWM0_MS_MODE; - if (enabled) - control |= BCM2835_PWM0_ENABLE; - else - control &= ~BCM2835_PWM0_ENABLE; - } - else if (channel == 1) - { - if (markspace) - control |= BCM2835_PWM1_MS_MODE; - else - control &= ~BCM2835_PWM1_MS_MODE; - if (enabled) - control |= BCM2835_PWM1_ENABLE; - else - control &= ~BCM2835_PWM1_ENABLE; - } - - // If you use the barrier here, wierd things happen, and the commands dont work - bcm2835_peri_write_nb(bcm2835_pwm + BCM2835_PWM_CONTROL, control); - // bcm2835_peri_write_nb(bcm2835_pwm + BCM2835_PWM_CONTROL, BCM2835_PWM0_ENABLE | BCM2835_PWM1_ENABLE | BCM2835_PWM0_MS_MODE | BCM2835_PWM1_MS_MODE); - -} - -void bcm2835_pwm_set_range(uint8_t channel, uint32_t range) -{ - if (channel == 0) - bcm2835_peri_write_nb(bcm2835_pwm + BCM2835_PWM0_RANGE, range); - else if (channel == 1) - bcm2835_peri_write_nb(bcm2835_pwm + BCM2835_PWM1_RANGE, range); -} - -void bcm2835_pwm_set_data(uint8_t channel, uint32_t data) -{ - if (channel == 0) - bcm2835_peri_write_nb(bcm2835_pwm + BCM2835_PWM0_DATA, data); - else if (channel == 1) - bcm2835_peri_write_nb(bcm2835_pwm + BCM2835_PWM1_DATA, data); -} - -// Allocate page-aligned memory. -void *malloc_aligned(size_t size) -{ - void *mem; - errno = posix_memalign(&mem, BCM2835_PAGE_SIZE, size); - return (errno ? NULL : mem); -} - -// Map 'size' bytes starting at 'off' in file 'fd' to memory. -// Return mapped address on success, MAP_FAILED otherwise. -// On error print message. -static void *mapmem(const char *msg, size_t size, int fd, off_t off) -{ - void *map = mmap(NULL, size, (PROT_READ | PROT_WRITE), MAP_SHARED, fd, off); - if (MAP_FAILED == map) - fprintf(stderr, "bcm2835_init: %s mmap failed: %s\n", msg, strerror(errno)); - return map; -} - -static void unmapmem(void **pmem, size_t size) -{ - if (*pmem == MAP_FAILED) return; - munmap(*pmem, size); - *pmem = MAP_FAILED; -} - -// Initialise this library. -int bcm2835_init(void) -{ - if (debug) - { - bcm2835_pads = (uint32_t*)BCM2835_GPIO_PADS; - bcm2835_clk = (uint32_t*)BCM2835_CLOCK_BASE; - bcm2835_gpio = (uint32_t*)BCM2835_GPIO_BASE; - bcm2835_pwm = (uint32_t*)BCM2835_GPIO_PWM; - bcm2835_spi0 = (uint32_t*)BCM2835_SPI0_BASE; - bcm2835_bsc0 = (uint32_t*)BCM2835_BSC0_BASE; - bcm2835_bsc1 = (uint32_t*)BCM2835_BSC1_BASE; - bcm2835_st = (uint32_t*)BCM2835_ST_BASE; - return 1; // Success - } - int memfd = -1; - int ok = 0; - // Open the master /dev/memory device - if ((memfd = open("/dev/mem", O_RDWR | O_SYNC) ) < 0) - { - fprintf(stderr, "bcm2835_init: Unable to open /dev/mem: %s\n", - strerror(errno)) ; - goto exit; - } - - // GPIO: - bcm2835_gpio = mapmem("gpio", BCM2835_BLOCK_SIZE, memfd, BCM2835_GPIO_BASE); - if (bcm2835_gpio == MAP_FAILED) goto exit; - - // PWM - bcm2835_pwm = mapmem("pwm", BCM2835_BLOCK_SIZE, memfd, BCM2835_GPIO_PWM); - if (bcm2835_pwm == MAP_FAILED) goto exit; - - // Clock control (needed for PWM) - bcm2835_clk = mapmem("clk", BCM2835_BLOCK_SIZE, memfd, BCM2835_CLOCK_BASE); - if (bcm2835_clk == MAP_FAILED) goto exit; - - bcm2835_pads = mapmem("pads", BCM2835_BLOCK_SIZE, memfd, BCM2835_GPIO_PADS); - if (bcm2835_pads == MAP_FAILED) goto exit; - - bcm2835_spi0 = mapmem("spi0", BCM2835_BLOCK_SIZE, memfd, BCM2835_SPI0_BASE); - if (bcm2835_spi0 == MAP_FAILED) goto exit; - - // I2C - bcm2835_bsc0 = mapmem("bsc0", BCM2835_BLOCK_SIZE, memfd, BCM2835_BSC0_BASE); - if (bcm2835_bsc0 == MAP_FAILED) goto exit; - - bcm2835_bsc1 = mapmem("bsc1", BCM2835_BLOCK_SIZE, memfd, BCM2835_BSC1_BASE); - if (bcm2835_bsc1 == MAP_FAILED) goto exit; - - // ST - bcm2835_st = mapmem("st", BCM2835_BLOCK_SIZE, memfd, BCM2835_ST_BASE); - if (bcm2835_st == MAP_FAILED) goto exit; - - ok = 1; - -exit: - if (memfd >= 0) - close(memfd); - - if (!ok) - bcm2835_close(); - - return ok; -} - -// Close this library and deallocate everything -int bcm2835_close(void) -{ - if (debug) return 1; // Success - unmapmem((void**) &bcm2835_gpio, BCM2835_BLOCK_SIZE); - unmapmem((void**) &bcm2835_pwm, BCM2835_BLOCK_SIZE); - unmapmem((void**) &bcm2835_clk, BCM2835_BLOCK_SIZE); - unmapmem((void**) &bcm2835_spi0, BCM2835_BLOCK_SIZE); - unmapmem((void**) &bcm2835_bsc0, BCM2835_BLOCK_SIZE); - unmapmem((void**) &bcm2835_bsc1, BCM2835_BLOCK_SIZE); - unmapmem((void**) &bcm2835_st, BCM2835_BLOCK_SIZE); - unmapmem((void**) &bcm2835_pads, BCM2835_BLOCK_SIZE); - return 1; // Success -} - -#ifdef BCM2835_TEST -// this is a simple test program that prints out what it will do rather than -// actually doing it -int main(int argc, char **argv) -{ - // Be non-destructive - bcm2835_set_debug(1); - - if (!bcm2835_init()) - return 1; - - // Configure some GPIO pins fo some testing - // Set RPI pin P1-11 to be an output - bcm2835_gpio_fsel(RPI_GPIO_P1_11, BCM2835_GPIO_FSEL_OUTP); - // Set RPI pin P1-15 to be an input - bcm2835_gpio_fsel(RPI_GPIO_P1_15, BCM2835_GPIO_FSEL_INPT); - // with a pullup - bcm2835_gpio_set_pud(RPI_GPIO_P1_15, BCM2835_GPIO_PUD_UP); - // And a low detect enable - bcm2835_gpio_len(RPI_GPIO_P1_15); - // and input hysteresis disabled on GPIOs 0 to 27 - bcm2835_gpio_set_pad(BCM2835_PAD_GROUP_GPIO_0_27, BCM2835_PAD_SLEW_RATE_UNLIMITED|BCM2835_PAD_DRIVE_8mA); - -#if 1 - // Blink - while (1) - { - // Turn it on - bcm2835_gpio_write(RPI_GPIO_P1_11, HIGH); - - // wait a bit - bcm2835_delay(500); - - // turn it off - bcm2835_gpio_write(RPI_GPIO_P1_11, LOW); - - // wait a bit - bcm2835_delay(500); - } -#endif - -#if 0 - // Read input - while (1) - { - // Read some data - uint8_t value = bcm2835_gpio_lev(RPI_GPIO_P1_15); - printf("read from pin 15: %d\n", value); - - // wait a bit - bcm2835_delay(500); - } -#endif - -#if 0 - // Look for a low event detection - // eds will be set whenever pin 15 goes low - while (1) - { - if (bcm2835_gpio_eds(RPI_GPIO_P1_15)) - { - // Now clear the eds flag by setting it to 1 - bcm2835_gpio_set_eds(RPI_GPIO_P1_15); - printf("low event detect for pin 15\n"); - } - - // wait a bit - bcm2835_delay(500); - } -#endif - - if (!bcm2835_close()) - return 1; - - return 0; -} -#endif