You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 

2.0 KiB

gatemate_experiments

Ongoing experiments with the Cologne Chip's GateMate FPGA architecture. All experiments are done with teh GateMate FPGA Starter (Eval) Kit.

Designs

Simple design which should display a blinking LED waving from LED1-LED8 of the GateMate FPGA Starter Kit. It uses CC_PLL & CC_CFG_END primitives of the GateMate FPGA.

uart_loop

Simple UART loop with UART RX & TX units and FIFO buffer between. It uses CC_PLL & CC_CFG_END primitives of the GateMate FPGA. With fifo depth >= 18 Yosys is infering CC_BRAM_20K instead of registers.

Beware: The simulation model of CC_BRAM_20K seems to be incorrect, so better set fifo depth < 18 or use yosys option -nobram when synthesizing the model for post-synthesis & post-implementation simulation.

uart_reg

Register file which can be accessed through UART. It uses CC_PLL & CC_CFG_END primitives of the GateMate FPGA. It contains 8 registers storing values of one byte each. The first received byte on the axis in port contains command & address:

  • 7 reserved
  • 6:4 register address
  • 3:0 command (0x0 read, 0x1 write)

In case of a write command, the payload has to follow with the next byte. In case of a read command, the value of the addressed register is returned on the axis out port. Register at address 0 is special. It contains the version and is read-only. Writes to that register are ignored.

uart_trng

An implementation of a TRNG which allows to read random data from the FPGA via UART. Inclusive a software tool for easy access. Random generation is based on a fibonacci ring oscillator (FiRo) with toggle flip-flop and von Neumann post-processing.

Further Ressources