Library of reusable VHDL components
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 

206 lines
6.1 KiB

library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity SpiSlaveE is
generic (
G_DATA_WIDTH : positive := 8; --* data bus width
G_DATA_DIR : natural range 0 to 1 := 0; --* start from lsb/msb 0/1
G_SPI_CPOL : natural range 0 to 1 := 0; --* SPI clock polarity
G_SPI_CPHA : natural range 0 to 1 := 0 --* SPI clock phase
);
port (
--+ system if
Reset_n_i : in std_logic;
Clk_i : in std_logic;
--+ SPI slave if
SpiSclk_i : in std_logic;
SpiSte_i : in std_logic;
SpiMosi_i : in std_logic;
SpiMiso_o : out std_logic;
--+ local VAI if
Data_i : in std_logic_vector(G_DATA_WIDTH-1 downto 0);
DataValid_i : in std_logic;
DataAccept_o : out std_logic;
Data_o : out std_logic_vector(G_DATA_WIDTH-1 downto 0);
DataValid_o : out std_logic;
DataAccept_i : in std_logic
);
end entity SpiSlaveE;
architecture rtl of SpiSlaveE is
type t_spi_state is (IDLE, TRANSFER, STORE);
signal s_spi_state : t_spi_state;
signal s_send_register : std_logic_vector(G_DATA_WIDTH-1 downto 0);
signal s_recv_register : std_logic_vector(G_DATA_WIDTH-1 downto 0);
signal s_sclk_d : std_logic_vector(2 downto 0);
signal s_ste_d : std_logic_vector(2 downto 0);
signal s_mosi_d : std_logic_vector(2 downto 0);
signal s_miso : std_logic;
signal s_data_valid : std_logic;
signal s_transfer_valid : boolean;
signal s_sclk_rising : boolean;
signal s_sclk_falling : boolean;
signal s_read_edge : boolean;
signal s_write_edge : boolean;
alias a_ste : std_logic is s_ste_d(s_ste_d'left);
alias a_mosi : std_logic is s_mosi_d(s_mosi_d'left);
constant C_BIT_COUNTER_START : natural := (G_DATA_WIDTH-1) * G_DATA_DIR;
constant C_BIT_COUNTER_END : natural := (G_DATA_WIDTH-1) * to_integer(not(to_unsigned(G_DATA_DIR, 1)));
begin
--* help signals for edge detection on sclk
s_sclk_rising <= true when s_sclk_d(2 downto 1) = "01" else false;
s_sclk_falling <= true when s_sclk_d(2 downto 1) = "10" else false;
s_read_edge <= s_sclk_rising when G_SPI_CPOL = G_SPI_CPHA else s_sclk_falling;
s_write_edge <= s_sclk_falling when G_SPI_CPOL = G_SPI_CPHA else s_sclk_rising;
--* Sync asynchronous SPI inputs with 3 stage FF line
--* We use 3 FF because of edge detection on sclk line
--* Mosi & ste are also registered with 3 FF to stay in
--* sync with registered sclk
SpiSyncP : process (Reset_n_i, Clk_i) is
begin
if (Reset_n_i = '0') then
if (G_SPI_CPOL = 0) then
s_sclk_d <= (others => '0');
else
s_sclk_d <= (others => '1');
end if;
s_ste_d <= (others => '1');
s_mosi_d <= (others => '0');
elsif rising_edge(Clk_i) then
s_sclk_d <= s_sclk_d(1 downto 0) & SpiSclk_i;
s_ste_d <= s_ste_d(1 downto 0) & SpiSte_i;
s_mosi_d <= s_mosi_d(1 downto 0) & SpiMosi_i;
end if;
end process SpiSyncP;
--* Save local data input when new data is provided and
--* we're not inside a running SPI transmission
--* Beware: Last saved data before a started SPI transmission "wins"
SendRegisterP : process (Reset_n_i, Clk_i) is
begin
if (Reset_n_i = '0') then
s_send_register <= (others => '0');
DataAccept_o <= '0';
elsif rising_edge(Clk_i) then
DataAccept_o <= '0';
if (DataValid_i = '1' and s_spi_state = IDLE) then
s_send_register <= Data_i;
DataAccept_o <= '1';
end if;
end if;
end process SendRegisterP;
--* Spi slave control FSM
SpiControlP : process (Reset_n_i, Clk_i) is
variable v_bit_counter : natural range 0 to G_DATA_WIDTH-1;
begin
if (Reset_n_i = '0') then
s_miso <= '0';
s_recv_register <= (others => '0');
v_bit_counter := C_BIT_COUNTER_START;
s_transfer_valid <= false;
s_spi_state <= IDLE;
elsif rising_edge(Clk_i) then
case s_spi_state is
when IDLE =>
s_miso <= '0';
s_recv_register <= (others => '0');
v_bit_counter := C_BIT_COUNTER_START;
s_transfer_valid <= false;
if (a_ste = '0') then
if (G_SPI_CPHA = 0) then
s_miso <= s_send_register(v_bit_counter);
end if;
s_spi_state <= TRANSFER;
end if;
when TRANSFER =>
if s_read_edge then
s_recv_register(v_bit_counter) <= a_mosi;
if (v_bit_counter = C_BIT_COUNTER_END) then
s_spi_state <= STORE;
else
if (G_DATA_DIR = 0) then
v_bit_counter := v_bit_counter + 1;
else
v_bit_counter := v_bit_counter - 1;
end if;
end if;
elsif s_write_edge then
s_miso <= s_send_register(v_bit_counter);
else
if (a_ste = '1') then
s_spi_state <= IDLE;
end if;
end if;
when STORE =>
if (a_ste = '1') then
s_transfer_valid <= true;
s_spi_state <= IDLE;
end if;
when others =>
s_spi_state <= IDLE;
end case;
end if;
end process SpiControlP;
--* Provide received SPI data to local interface
--* Output data is overwritten if it isn't fetched
--* until next finished SPI transmission
RecvRegisterP : process (Reset_n_i, Clk_i) is
begin
if (Reset_n_i = '0') then
Data_o <= (others => '0');
s_data_valid <= '0';
elsif rising_edge(Clk_i) then
if (s_transfer_valid) then
Data_o <= s_recv_register;
s_data_valid <= '1';
end if;
if (DataAccept_i = '1' and s_data_valid = '1') then
s_data_valid <= '0';
end if;
end if;
end process RecvRegisterP;
--+ Output port connections
DataValid_o <= s_data_valid;
SpiMiso_o <= 'Z' when SpiSte_i = '1' else s_miso;
-- psl default clock is rising_edge(Clk_i);
--
-- psl assert always (s_spi_state = IDLE or s_spi_state = TRANSFER or s_spi_state = STORE);
-- psl assert always (s_data_valid and DataAccept_i) -> next not(s_data_valid);
end architecture rtl;