Trying to verify Verilog/VHDL designs with formal methods and tools
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 

168 lines
4.6 KiB

library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity vai_reg is
port (
Reset_n_i : in std_logic;
Clk_i : in std_logic;
-- req
Din_i : in std_logic_vector(7 downto 0);
DinValid_i : in std_logic;
DinStart_i : in std_logic;
DinStop_i : in std_logic;
DinAccept_o : out std_logic;
-- ack
Dout_o : out std_logic_vector(7 downto 0);
DoutValid_o : out std_logic;
DoutStart_o : out std_logic;
DoutStop_o : out std_logic;
DoutAccept_i : in std_logic
);
end entity vai_reg;
architecture rtl of vai_reg is
constant C_READ : std_logic_vector(3 downto 0) := x"0";
constant C_WRITE : std_logic_vector(3 downto 0) := x"1";
type t_fsm_state is (IDLE, GET_HEADER, GET_DATA,
SET_DATA, SEND_HEADER, SEND_DATA, SEND_FOOTER);
signal s_fsm_state : t_fsm_state;
type t_register is array(0 to 7) of std_logic_vector(7 downto 0);
signal s_register : t_register;
signal s_header : std_logic_vector(7 downto 0);
signal s_data : std_logic_vector(7 downto 0);
signal s_error : boolean;
signal s_dout_accepted : boolean;
alias a_addr : std_logic_vector(3 downto 0) is s_header(7 downto 4);
begin
s_dout_accepted <= true when DoutValid_o = '1' and DoutAccept_i = '1' else
false;
process (Reset_n_i, Clk_i) is
begin
if (Reset_n_i = '0') then
DinAccept_o <= '0';
DoutStart_o <= '0';
DoutStop_o <= '0';
DoutValid_o <= '0';
Dout_o <= (others => '0');
s_header <= (others => '0');
s_data <= (others => '0');
s_register <= (others => (others => '0'));
s_error <= false;
s_fsm_state <= IDLE;
elsif (rising_edge(Clk_i)) then
case s_fsm_state is
when IDLE =>
DinAccept_o <= '0';
DoutStart_o <= '0';
DoutStop_o <= '0';
DoutValid_o <= '0';
Dout_o <= (others => '0');
s_header <= (others => '0');
s_data <= (others => '0');
s_error <= false;
s_fsm_state <= GET_HEADER;
when GET_HEADER =>
DinAccept_o <= '1';
if (DinValid_i = '1' and DinStart_i = '1') then
DinAccept_o <= '0';
s_header <= Din_i;
if (Din_i(3 downto 0) = C_READ and DinStop_i = '1') then
s_fsm_state <= GET_DATA;
elsif (Din_i(3 downto 0) = C_WRITE and DinStop_i = '0') then
s_fsm_state <= SET_DATA;
else
s_fsm_state <= IDLE;
end if;
end if;
when GET_DATA =>
if (unsigned(a_addr) <= 7) then
s_data <= s_register(to_integer(unsigned(a_addr)));
else
s_error <= true;
s_data <= (others => '0');
end if;
s_fsm_state <= SEND_HEADER;
when SET_DATA =>
DinAccept_o <= '1';
if (DinValid_i = '1') then
DinAccept_o <= '0';
if (DinStop_i = '1') then
if (unsigned(a_addr) <= 7) then
-- Following line results in a Segmentation Fault
--s_register(to_integer(unsigned(a_addr))) <= Din_i;
-- Following line results in following error:
-- ERROR: Unsupported cell type $dlatchsr for cell $verific$wide_dlatchrs_8.$verific$i1$172.
s_register(0) <= Din_i;
else
s_error <= true;
end if;
s_fsm_state <= SEND_HEADER;
else
s_fsm_state <= IDLE;
end if;
end if;
when SEND_HEADER =>
DoutValid_o <= '1';
DoutStart_o <= '1';
Dout_o <= s_header;
if (s_dout_accepted) then
DoutValid_o <= '0';
DoutStart_o <= '0';
if (s_header(3 downto 0) = C_WRITE) then
s_fsm_state <= SEND_FOOTER;
else
s_fsm_state <= SEND_DATA;
end if;
end if;
when SEND_DATA =>
DoutValid_o <= '1';
Dout_o <= s_data;
if (s_dout_accepted) then
DoutValid_o <= '0';
s_fsm_state <= SEND_FOOTER;
end if;
when SEND_FOOTER =>
DoutValid_o <= '1';
DoutStop_o <= '1';
Dout_o <= x"01" when s_error else x"00";
if (s_dout_accepted) then
Dout_o <= (others => '0');
DoutValid_o <= '0';
DoutStop_o <= '0';
s_fsm_state <= IDLE;
end if;
when others => null;
end case;
end if;
end process;
end architecture rtl;