gatemate_experiments

Ongoing experiments with the Cologne Chip's GateMate FPGA architecture. All experiments are done with teh GateMate FPGA Starter (Eval) Kit.

Designs

blink

Simple design which should display a blinking LED waving from LED1-LED8 of the GateMate FPGA Starter Kit. It uses CC_PLL & CC_CFG_END primitives of the GateMate FPGA.

uart_reg

Register file which can be accessed through UART. It uses CC_PLL & CC_CFG_END primitives of the GateMate FPGA. It contains 8 registers storing values of one byte each. The first received byte on the axis in port contains command & address:

• 7 reserved
• 6:4 register address
• 3:0 command (0x0 read, 0x1 write)

In case of a write command, the payload has to follow with the next byte. In case of a read command, the value of the addressed register is returned on the axis out port. Register at address 0 is special. It contains the version and is read-only. Writes to that register are ignored.

Further Ressources

• GateMate FPGA
• GateMate FPGA Eval Board
• GHDL VHDL Simulation & Synthesis
• Yosys Synthesis Suite